• Size: 120*120*25mm
• Speed: 1200RPM±10%
• Noise: 22dBA
• Air flow: 38CFM
• Interface: 4Pin
• Voltage: DC12V
• Rated power: 5.1W

• The P12 PWM PST is a 120 mm fan with PWM PST connectors. It features completely redesigned fan blades and is optimised for high static pressure.
• Thanks to this, it is especially effective when used on heatsinks and in situations with higher air resistance.
• The wide RPM range from 200 to 1800 RPM can be regulated seamlessly and synchronously with other fans thanks to ARCTIC’s PWM Sharing Technology (PST).
• The newly developed motor with a low coil temperature significantly increases the life span of the fan.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• PERFECT CASE FAN REGULATION WITH PWM: The PWM function allows the motherboard to run the fan precisely at its necessary speed, this guarantees the required cooling and minimizes the noise level
• PWM SHARING TECHNOLOGY (PST): PST assures that all of your fans listen to one control signal, e.g. you share the CPU Cooler’s PWM signal and assure that your case fans stand down at low load and spin up whenever necessary
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 200–1350 RPM, Airflow: 74 CFM/126 m³/h (@ 1350 RPM), Noise Level: 0.3 Sone (@ 1350 RPM), Pin: 4-pin

• DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor, with its enclosed design, provide even and rich illumination
• EASY TO COMBINE: Both the fan and A-RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans
• OPTIMIZED FOR STATIC PRESSURE: Thanks to its high static pressure, the fan guarantees efficient cooling, even with increased air resistance; Suitable for use on heat sinks & radiators
• 0-2000 RPM: The speed of the fan can be throttled to a standstill via PWM; This allows for silent operation in IDLE while guaranteeing the highest performance when needed
• SPECIFICATIONS: Fan speed: 0-2000 rpm; Airflow: 48;8 CFM/82;91 m³/h; Static pressure: 1;85 mmH2O; Noise level: 0;3 Sone; Fan connector: 4-pin; LED connector: 3-pin

Specifications:

• Overall Dimension: 80 X 80 X 25mm
• Fan Dimension: 80 X 80 X 25mm
• Net Weight: 82g
• Bearing Type: Hydro Bearing
• Rated Voltage: 12VDC
• Operating Voltage: 10.8～13.2VDC
• Started Voltage: 7VDC
• Rated Current: 0.08±10%A
• Power Input: 0.96W
• Fan Speed: 1800±10%RPM
• Max. Air Flow: 21.8CFM
• Noise: 20.3dB(A)

• Improved daisy chain design to connect 2 clusters of fans.
• SL120 V2 fan frame thickness is 28mm to provide 10% improved airflow compared to V1.
• Removable interlocking keys to provide better radiator clearance.
• Start/stop fan RPM support for a quieter environment.
• Smoother side lighting for a better aesthetic.
• Only one cable is required for each fan cluster when using the provided new UNI HUB to control lighting effects via L-Connect 3.

• OPTIMISED FOR STATIC PRESSURE: During the development of the new BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure
• PWM SHARING TECHNLOGY (PST): PST ensures that all your fans listen to a single control signal, stop at low load, turn whenever necessary
• EFFICIENT ENGINE MODERNISATION: Thanks to sinusoidal magnetation, the new engine generates only 5% of the vibrations due to the switching of an ordinary DC motor
• 200 TO 2100 RPM REGULATED VIA PWM PST: With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P120 fan speed can be controlled synchronously with all your other fans together
• TECHNICAL DATA: Fan speed: 200–2100 RPM, Airflow: 67;56 CFM/114;79 m³/h (@ 2100 RPM), Noise Level: 0;45 Sone (@ 2100 RPM), Pin: 4-pin

Optimised for Static Pressure

During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

0 dB Mode — Zero rpm

The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

Strong Cooling Performance

Numerous improvements, such as updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB(A), the new P-fans left many competitors behind.

• OPTIMISED FOR STATIC PRESSURE: Fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators
• 200 TO 1700 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors
• EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA: Fan speed: 200–1700 RPM, Airflow: 72;8 CFM/123;76 m³/h (@ 1700 RPM), Noise Level: 0;3 Sone (@ 1700 RPM), Pin: 4-pin

• If your motherboard has ONE 5V 3-pin ADD-RGB header, you can use it to connect RGB extender cable to control and SYNC these three fans and one more DEEPCOOL addressable RGB device, such as CF 120, CF140, RGB 200PRO. If your motherboard has more than one 5V 3-pin ADD-RGB header, these fans can SYNC with Add RGB devices of other brands
• If your motherboard does not have 5V 3-pin ADD-RGB header, you can use the included cable controller to connect the RGB extender cable to realize SYNC of these three fans and 3 more DEEPCOOL addressable RGB devices, such as CF 120, CF140, RGB 200PRO
• Fan speed can be intelligently controlled by motherboard in accordance with temperature
• Utilize 12pcs of independently programmable RGB LEDs for amazing display effects
• Fan Connector: 4Pin. LED Type: Addressable RGB LED. LED Connector: 3pin (+5V-D-G). LED Control: motherboard with 5V ADD-RGB Header. Cable controller is also available