Component | Specification |
---|---|
CPU | AMD Socket AM5, support for AMD Ryzen™ 7000 Series Processors |
Chipset | AMD B650 |
Memory | – Support for DDR5 8000(OC)/7800(OC)/7600(OC)/7200(OC)/7000(OC)/ |
6800(OC)/6666(OC)/6600(OC)/6400(OC)/6200(OC)/6000(OC)/5600(OC)/ | |
5200/4800/4400 MT/s memory modules | |
– 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM | |
capacity) of system memory | |
– Dual channel memory architecture | |
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
– Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and | |
Extreme Memory Profile (XMP) memory module | |
Onboard Graphics | Integrated Graphics Processor: |
– 1 x DisplayPort, supporting a maximum resolution of 3840×2160@144 Hz | |
(Support for DisplayPort 1.4 version and HDR) | |
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz | |
(Support for HDMI 2.1 version and HDCP 2.3) | |
(Support native HDMI 2.1 TMDS compatible ports) | |
(Graphics specifications may vary depending on CPU support.) | |
Audio | Realtek® Audio CODEC |
– High Definition Audio | |
– 2/4/5.1/7.1-channel | |
– You can change the functionality of an audio jack using the audio | |
software. To configure 7.1-channel audio, access the audio software | |
for audio settings. | |
LAN | Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
Wireless Communication | – AMD Wi-Fi 6E RZ616 (MT7922A22M) (For PCB rev. 1.0) |
– WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency | |
bands | |
– BLUETOOTH 5.2 | |
– Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data | |
rate | |
– Intel® Wi-Fi 6E AX210 (For PCB rev. 1.1) | |
– WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency | |
bands | |
– BLUETOOTH 5.3 | |
– Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data | |
rate | |
(Actual data rate may vary depending on environment and equipment.) | |
Expansion Slots | CPU: |
– 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 | |
(PCIEX16) | |
(For optimum performance, if only one PCI Express graphics card is | |
to be installed, be sure to install it in the PCIEX16 slot.) | |
Chipset: | |
– 2 x PCI Express x16 slots, supporting PCIe 3.0 and running at x1 | |
(PCIEX1_1/2) | |
Storage Interface | CPU: |
– 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 | |
SSD support) (M2A_CPU) | |
(* Actual support may vary by CPU.) | |
– 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2 | |
SSD support) (M2B_CPU) | |
Chipset: | |
– 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2 | |
SSD support) (M2C_SB) | |
– 4 x SATA 6Gb/s connectors | |
– RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices | |
– RAID 0, RAID 1, and RAID 10 support for SATA storage devices | |
USB | CPU: |
– 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support | |
– 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
CPU + USB 2.0 Hub: | |
– 4 x USB 2.0/1.1 ports on the back panel | |
Chipset: | |
– 1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through | |
the internal USB header | |
– 3 x USB 3.2 Gen 1 ports (1 port on the back panel, 2 ports available | |
through the internal USB header) | |
– 4 x USB 2.0/1.1 ports available through the internal USB headers | |
Chipset+USB 3.2 Gen 1 Hub: | |
– 4 x USB 3.2 Gen 1 ports on the back panel | |
Internal I/O Connectors | – 1 x 24-pin ATX main power connector |
– 1 x 8-pin ATX 12V power connector | |
– 1 x 4-pin ATX 12V power connector | |
– 1 x CPU fan header | |
– 1 x water cooling CPU fan header | |
– 3 x system fan headers | |
– 1 x system fan/water cooling pump header | |
– 2 x addressable LED strip headers | |
– 2 x RGB LED strip headers | |
– 1 x CPU cooler LED strip/RGB LED strip header | |
– 3 x M.2 Socket 3 connectors | |
– 4 x SATA 6Gb/s connectors | |
– 1 x front panel header | |
– 1 x front panel audio header | |
– 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support | |
– 1 x USB 3.2 Gen 1 header | |
– 2 x USB 2.0/1.1 headers | |
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 | |
SPI 2.0 module only) | |
– 1 x reset button | |
– 1 x reset jumper | |
– 1 x Clear CMOS jumper | |
Back Panel Connectors | – 1 x Q-Flash Plus button |
– 2 x SMA antenna connectors (2T2R) | |
– 1 x DisplayPort | |
– 1 x HDMI port | |
– 1 x USB Type-C® port, with USB 3.2 Gen 2 support | |
– 2 x USB 3.2 Gen 2 Type-A ports (red) | |
– 5 x USB 3.2 Gen 1 ports | |
– 4 x USB 2.0/1.1 ports | |
– 1 x RJ-45 port | |
– 3 x audio jacks | |
I/O Controller | iTE® I/O Controller Chip |
H/W Monitoring | – Voltage detection |
– Temperature detection | |
– Fan speed detection | |
– Water cooling flow rate detection | |
– Fan fail warning | |
– Fan speed control (Whether the fan (pump) speed control function is | |
supported will depend on the fan (pump) you install.) | |
BIOS | – 1 x 256 Mbit flash |
– Use of licensed AMI UEFI BIOS | |
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features | – Support for GIGABYTE Control Center (GCC) |
(* Available applications in GCC may vary by motherboard model. | |
Supported functions of each application may also vary depending on | |
motherboard specifications.) | |
– Support for Q-Flash | |
– Support for Q-Flash Plus | |
Bundled Software | – Norton® Internet Security (OEM version) |
– LAN bandwidth management software | |
Operating System | – Support for Windows 11 64-bit |
– Support for Windows 10 64-bit | |
Form Factor | – ATX Form Factor; 30.5cm x 24.4cm |
Specs may change anytime without further notice*
Reviews
There are no reviews yet.