Component | Specification |
---|---|
CPU | AMD Socket AM5, support for AMD Ryzen™ 7000 Series Processors |
Chipset | AMD B650 |
Memory | – Support for DDR5 8000(OC)/ 7800(OC)/ 7600(OC)/ 7200(OC)/ 7000(OC)/ 6800(OC)/ 6666(OC)/ 6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5600(OC)/ 5200/ 4800/ 4400 MT/s memory modules – 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory – Dual channel memory architecture – Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules – Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory module |
Onboard Graphics | Integrated Graphics Processor: – 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz – Support for HDMI 2.1 version and HDCP 2.3. – Support native HDMI 2.1 TMDS compatible ports. (Graphics specifications may vary depending on CPU support.) |
Audio | Realtek® ALC1220-VB CODEC – High Definition Audio – 2/4/5.1/7.1-channel – Support for S/PDIF Out |
LAN | Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
Wireless Communication module | – AMD Wi-Fi 6E RZ616 (MT7922A22M) (For PCB rev. 1.0) – WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands – BLUETOOTH 5.2 – Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate – Intel® Wi-Fi 6E AX210 (For PCB rev. 1.1) – WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands – BLUETOOTH 5.3 – Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate (Actual data rate may vary depending on environment and equipment.) |
Expansion Slots | CPU: – 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16) – For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. Chipset: – 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) – The PCIEX4 slot shares bandwidth with the M2C_SB connector. The PCIEX4 slot becomes unavailable when a device is installed in the M2C_SB connector. – 1 x PCI Express x1 slot, supporting PCIe 3.0 and running at x1 (PCIEX1) – Support for AMD CrossFire™ technology (PCIEX16 and PCIEX4) |
Storage Interface | CPU: – 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD support) (M2A_CPU) – Actual support may vary by CPU. – 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2 SSD support) (M2B_CPU) Chipset: – 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 4.0 x4/x2 SSD support) (M2C_SB) – 4 x SATA 6Gb/s connectors – RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices – RAID 0, RAID 1, and RAID 10 support for SATA storage devices |
USB | CPU: – 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2 support – 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel CPU + USB 2.0 Hub: – 4 x USB 2.0/1.1 ports on the back panel Chipset: – 1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through the internal USB header – 1 x USB 3.2 Gen 2 Type-A ports (red) on the back panel – 2 x USB 3.2 Gen 1 ports available through the internal USB header – 4 x USB 2.0/1.1 ports available through the internal USB headers Chipset+USB 3.2 Gen 1 Hub: – 4 x USB 3.2 Gen 1 ports on the back panel |
Internal I/O Connectors | – 1 x 24-pin ATX main power connector – 1 x 8-pin ATX 12V power connector – 1 x 4-pin ATX 12V power connector – 1 x CPU fan header – 1 x water cooling CPU fan header – 4 x system fan headers – 2 x system fan/water cooling pump headers – 2 x addressable LED strip headers – 2 x RGB LED strip headers – 1 x CPU cooler LED strip/RGB LED strip header – 3 x M.2 Socket 3 connectors – 4 x SATA 6Gb/s connectors – 1 x front panel header – 1 x front panel audio header – 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support – 1 x USB 3.2 Gen 1 header – 2 x USB 2.0/1.1 headers – 1 x noise detection header – 1 x THB_U4 add-in card connector – 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) – 1 x serial port header – 1 x reset button – 1 x reset jumper – 2 x temperature sensor headers – 1 x Clear CMOS jumper |
Back Panel Connectors | – 1 x Q-Flash Plus button – 2 x SMA antenna connectors (2T2R) – 4 x USB 2.0/1.1 ports – 1 x HDMI port – 3 x USB 3.2 Gen 2 Type-A ports (red) – 1 x USB Type-C® port, with USB 3.2 Gen 1 support – 4 x USB 3.2 Gen 1 ports – 1 x RJ-45 port – 2 x audio jacks – 1 x optical S/PDIF Out connector |
I/O Controller | iTE® I/O Controller Chip |
H/W Monitoring | – Voltage detection – Temperature detection – Fan speed detection – Water cooling flow rate detection – Fan fail warning – Fan speed control (Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.) – Noise detection |
BIOS | – 1 x 256 Mbit flash – Use of licensed AMI UEFI BIOS – PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features | – Support for GIGABYTE Control Center (GCC) (Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.) – Support for Q-Flash – Support for Q-Flash Plus |
Bundled Software | – Norton® Internet Security (OEM version) – LAN bandwidth management software |
Operating System | – Support for Windows 11 64-bit – Support for Windows 10 64-bit |
Form Factor | ATX Form Factor; 30.5cm x 24.4cm |
Specs may change anytime without further notice*
Reviews
There are no reviews yet.