Power each group of fans by connecting the PWM cable on the receiver to the motherboard (the LCD version also requires a separate USB connection for signal transmission). The cable length can be shorten by winding it around the organizer on the receiver.
Note: The LED and LCD version use a different receiver, for the mix cluster, please use the LCD version receiver.
Note: If the motherboard 4-pin PWM portsโ power is insufficient (below 1A) and the fan shows a flickering white light upon startup, this indicates unstable power from the motherboard. In this case, please connect the cable to a different 4-pin PWM port on the motherboard or use the included 12V to SATA adapter from the triple-pack.
Adopting a wireless solution minimizes the number of cables, and simplifies cable management while avoiding occupying the few available USB 2.0 ports on the motherboard. This allows users to connect more devices without restriction.
MODEL NAME | UNI FAN SL Wireless LCD 120 Reverse Blade | |||
---|---|---|---|---|
MODEL NO. | 12RSLLCD1W3B | 12RSLLCD1W3W | 12RSLLCD1W1B | 12RSLLCD1W1W |
COLOR | BLACK | WHITE | BLACK | WHITE |
NUMBER OF FANS | 3 | 3 | 1 | 1 |
CONTROLLER | Yes | No | ||
CONNECTOR TYPE | 4-PIN PWM + 9-PIN USB x1, 3-12V PWM to SATA x1 |
4-PIN PWM + 9-PIN USB x1 | ||
FAN DIMENSION | 120ร124.5x28mm | |||
FAN SPEED | 0,350~1900 RPM | |||
MAX. AIR PRESSURE | 2.1 mmH2O (Maximum) | |||
MAX. AIRFLOW | 51.45 CFM (Maximum) | |||
ACOUSTIC NOISE | 31 dBA (Maximum) | |||
INPUT POWER | 2.64W | |||
MATERIAL | PBT | |||
RATED VOLTAGE | 40 | |||
BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
OPERATE VOLTAGE | DC12V & 5V |
Specification may change without further notice.
Reviews
There are no reviews yet